Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 120

Страница: 120 / 271

CC2000 User Manual

106

Access Rights – KVM Devices

When a KVM device is selected in the Sidebar or the Interactive Display Panel,
you can set the configuration and access rights for it by clicking the

Access

Rights

Panel Menu item. Clicking this item brings up a page that shows a list

of all the users and groups that have been given access to it.

Adding Users or Groups to the Device User/Group List

To give a user or group access to the device, do the following:

1. Click

Add

. A list of qualified users and groups appears.

2. Click to put a check in the checkbox in front of the names of the users or

groups that you want to access the device or port.

3. Set the configuration rights for the users or groups:

Allowed

– The user or group can configure the device’s settings.

Denied

– The user or group cannot configure the device’s settings.

4. Set the access rights for the users or groups:

Administrator

– When accessing the device, the user or group has

administrator privileges on it (according to the device’s authorization
policy).

User

– When accessing the device, the user or group has user

privileges on it (according to the device’s authorization policy).

View Only

– When accessing the device, the user or group can only

view its ports – they cannot perform any actions on them.

No Access

– The user or group cannot access any of the device’s ports.

5. When you have finished making your configuration rights settings, click

Save

. The new users and groups are added to the device’s User/Group list.

cc2k.book Page 106 Tuesday, December 21, 2010 4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Результаты поиска

Содержание ALTUSEN CC2000

Отзывы:

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 120 / 271

Результаты поиска

Содержание ALTUSEN CC2000

Отзывы: