Altusen ALTUSEN CC2000 Скачать руководство пользователя страница 207

Страница: 207 / 271

Chapter 8. Logs

193

Session History

The CC2000 keeps a record of all user sessions that take place. When you click

Session History

on the Submenu bar, the

Session History Search

page appears:

Session History Search

To search the session history records, do the following:

1. For

Time Range

, selecting

All

searches all the records that exist in the

database. To search records for a particular time period, select either the

Include

Exclude

radio button, and set the time parameters with the

From

and

settings.

Note:

1. If the

Include

button is selected, all the events that fall within the

specified time range are searched.

2. If the

Exclude

button is selected, only the events that fall outside

of the specified time range are searched.

2. When you have finished making your time range choices, click

Search

(at

the top-right of the panel).

The search results are displayed in the Session History List in the main panel.

To save the search results to a file, click the button with the diskette icon.

To print out the search results, click the button with the printer icon.

The sort order of the list can be changed by clicking the column headings.

cc2k.book Page 193 Tuesday, December 21, 2010 4:00 PM

Содержание ALTUSEN CC2000
















































































































































































































































































Результаты поиска

Содержание ALTUSEN CC2000

Отзывы:

Altusen ALTUSEN CC2000, Руководство пользователя, Страница: 207 / 271

Результаты поиска

Содержание ALTUSEN CC2000

Отзывы: