38
TRAVEL PREPARATION
TRAVELLING ON PUBLIC HIGHWAYS
Before travelling on public roads, the following must be carried out:-
1. Lower the dumper skip completely.
2. Check that all required lighting is working correctly.
7XUQRIIJUHHQEHDFRQLI¿WWHG
4. Check the dumper is ready to be driven on a public highway
TRAVELLING ON WORKSITES
Before travelling on worksites, the following must be carried out:-
1. Lower the dumper skip completely. The skip must be kept in this position whilst travelling across a worksite.
6HFXUHO\¿WWKH5236LQWRWKHZRUNSRVLWLRQ6HHSDJH
3. Install the beacons (See page 40).
ROPS (ROLL-OVER PROTECTION STRUCTURE)
INSTALLING THE ROPS (WORKING POSITION)
1. Park the dumper safely on stable, level ground.
2. Locate the 2 x Lynch Pins (Figure 13, Item A) and 2 x Securing Pins (Item B).
3. Gently raise the ROPS (Item C) upwards
NOTE:-
The ROPS is heavy and must be raised with 2 people. One on each side of the dumper.
4. Locate the Securing Pins and lock in place with the Lynch Pins.
FOLDING THE ROPS (LOWERED POSITION)
1. Park the dumper safely on stable, level ground.
2. Remove the Lynch Pins from the Securing Pins.
3. Remove the Securing Pins from the ROPS.
4. Gently lower the ROPS downwards.
NOTE:-
The ROPS is heavy and must be lowered with 2 people. One on each side of the dumper.
5. Install the Securing Pins back into the ROPS and secure with the Lynch Pins for safe storage.
Operating Instructions
GB
ALWAYS observe the applicable rules and regulations for the area in which you are travelling. It is the
operator’s repsonsibility to ensure these are followed.
WARNING
B
C
A
Figure. 13
A. Lynch Pins
B. Securing Pins
C. ROPS
7KH5236FDQEHIROGHGGRZQZKHUHWKHGXPSHUKDVWRPRYHWKURXJKDORZKHLJKWHQWUDQFH7KH5236
must be reinstalled once the low height entrance has been cleared by the dumper.
CAUTION
1RWXVLQJWKH5236FDQEHGDQJHURXVDQGFRXOGFDXVHVHULRXVLQMXU\RUHYHQGHDWK
WARNING
