33
BEFORE STARTING THE ENGINE
Before the starting the engine to operate the dumper, you must
ENSURE
the following steps are taken:-
•
ALWAYS
let other bystanders and personnel know you are starting up, do not start until every one is clear of the machine.
•
ENSURE
all loose items and accessories are safely secured or stowed away.
•
ENSURE
the correct PPE is being worn.
•
ENSURE
the pre-start checks procedure listed in this manual has been carried out.
•
ENSURE
the ROPS structure is securely placed in the work position.
Once the above has been carried out, you can do the following:
1. Safely enter the operator station (See page 34)
2. Adjust the seat so the operator can reach the dumper controls without stretching (See page 35)
3. Fasten the seat belt, to secure the opeator in position for operating the dumper (See page 36)
4.
ENSURE
the drive lever is in the neutral position (See page 39)
BATTERY ISOLATOR
ENSURE
the battery isolator key is removed before any maintenance work is performed or when the dumper is left unattended to
prevent unauthorized usage.
ISOLATING THE BATTERY
1. Turn the dumper ignition key to the OFF position (See page 15)
2. Lift the seat pan to get access to the battery isolator.
3. Turn the battery isolator key (Figure 8, Item 1) to the OFF position
and remove the key.
CONNECTING THE BATTERY
1. ENSURE the dumper ignition is turned OFF.
2. Insert the battery isolator key and turn to the ON position
Operating Instructions
GB
ENSURE
WKH5236VWUXFWXUHLVUDLVHGDQGVHFXUHGLQSODFHEHIRUHRSHUDWLQJWKHGXPSHU
NEVER operate the dumper without this in place.
WARNING
NEVER isolate the battery when the engine is running. This may cause serious damage to the dumper
electrics.
WARNING
1
Figure 8
1. Battery Isolator Key
