13
End Gable Assembly
5
Diagram 8
Dia. 8
Dia. 7
EV0502
EV0503
EV0502
EV0502
EV0408
EV04
04
You will need to drill a pilot hole in
the bottom of each side corner bar
as shown in diagram 7. This should
come through half way up the
mortise slot. Now slot the side
corner bar into place, fix the bottom
of the bar with an 80mm screw.
With the top of the bar lined up with
the end of the purling (keeping the
inside edges flush) drill a pilot hole
close to the inside face of the tenon
on the purling (diagram 8), then fix
with a 25mm countersunk screw.
This is only a transit screw so just
make sure the joint is nice and tight,
a larger fixing will be added later.
20
mm
16m
m
Diagram 7
80m
m Sc
rew
25mm Screw
Internal
