Altinex MT107-103, Руководство пользователя

Страница: 12 / 28

MULTITASKER™
400-0367-004
11
Example 2: [MAT1;16;16;00;00;02;00;C5S]
Inputs = 16
Outputs = 16
Input Offset = 00
Output Offset = 00
Width = 02
Spacing = 00
In this configuration, if Input 1 is connected to
Output 16, the entire channel, 1a and 1b, will be
switched to outputs 16a and 16b respectively.
Input Cards Output Cards
4 3 2 1 1 2 3 4
13a 9a 5a 1a 1a 5a 9a 13a
13b 9b 5b 1b 1b 5b 9b 13b
14a 10a 6a 2a 2a 6a 10a 14a
14b 10b 6b 2b 2b 6b 10b 14b
15a 11a 7a 3a 3a 7a 11a 15a
15b 11b 7b 3b 3b 7b 11b 15b
16a 12a 8a 4a 4a 8a 12a 16a
16b 12b 8b 4b 4b 8b 12b 16b
6. [M j C n ]
This command selects the matrix to be active.
Command Format: [MjCnUi]
j = Matrix ID (j = # from 1 to 9)
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
There is a matrix engine in slot 5. Send the
command [M1C5] to recall matrix
configuration #1 of card 5.
RECALL MATRIX ON POWER UP
In order to make configuration #1 of card 5 the
default configuration when power is turned on,
send the [M1C5S]. The feedback will be:
[SAVEDC05]
7. [ONmmCn]
This command turns on a single output for the
current matrix.
Command Format: [ONmmCnUi]
mm = Output Number (mm = # from 01 to 64)
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
There is an MT107-103 in slot 5. Turn ON
output number 64 by sending the command
[ON64C5].
8. [ONCn]
This command turns on all outputs for the
current matrix.
Command Format: [ONCnUi]
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
There is an MT107-103 in slot 5. Turn ON ALL
outputs by sending the command [ONC5].
9. [OFFmmCn]
This command turns off a single output for the
current matrix.
Command Format: [OFFmmCnUi]
mm = Output Number (mm = # from 01 to 64)
Cn = Card ID (n = slot # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
There is an MT107-103 in slot 5. Turn OFF only
output number 01 by sending the command
[OFF01C5].
10. [OFFCn]
This command turns off all outputs for the
current matrix.