Quantum Board Channel Gain Configuration
AltiWare OE System Administration Manual
83
Tru
n
k
C
o
nf
igur
a
tio
n
Quantum Board Channel Gain Configuration
The incoming and outgoing volume can be quickly adjusted for Quantum
trunks or extensions by selecting the Quantum Board Channel Gain
Configuration… menu item on the Management Menu. Here’s an
example of the window:
Figure 33.
Quantum Board Channel Gain Configuration window
You can also configure incoming and outgoing volume through the board
configuration.
The Receiver Gain and Transmission Attenuation slide settings adjust
the incoming and outgoing volume, respectively, for every Quantum
channel.
The default settings for each of these is 0 dB. Caution should be used in
changing the Receiver Gain or Transmission Attenuation, because, too
high a setting causes distortion in the voice quality.
Incoming and outgoing volume for Quantum trunks or extensions can also
be configured through the physical extension, as discussed under “Setting
the Line Properties” on page 92, or when configuring the Quantum board.
Содержание AltiWare OE 4.0
