Configuring the Triton T1/PRI Board
AltiWare OE System Administration Manual
65
Bo
ar
d
Co
n
fig
u
ratio
n
Setting up T1 or PRI Channels on the Triton T1/PRI Board
Use the T1/PRI Configuration button (Figure 22 on pa ge60) to invoke
the T1/PRI Configuration window. The Triton T1/PRI Board can be
configured to either T1 or ISDN PRI through the configuration options
within the window.
Figure 23.
T1/PRI Configuration window
The CH -> Type list displays the channel types.
Selecting Span Types
•
T1 - select this option to associate all channels on the span to a T1
Robbed-bit signal.
•
Regular ISDN PRI - select this option to indicate 23B+D ISDN PRI
span and to designate the last channel as the D channel.
•
Custom ISDN PRI - select this option to set the D channel to the
desired location.
For future use: The following two settings will be used in conjunction
with the Custom ISDN PRI setting in a future release:
— Set the D channel using the drop-down list.
— Type in a B Channel Logical Interface ID
•
ISDN Network side - if you are connecting two AltiServ PRI spans
back-to-back (for example, in a Tie Trunk operation), one span must
be configured as ISDN Network Side.
Содержание AltiWare OE 4.0
