Altera MAX 10 Скачать руководство пользователя | Manualshive

Страница: 87 / 87

background image

Additonal Information for MAX 10 Clocking

and PLL User Guide

A

2015.06.12

UG-M10CLKPLL

Subscribe

Send Feedback

Document Revision History for MAX 10 Clocking and PLL User Guide

Date

Version

Changes

June 2015

2015.06.12 Added connectivity restriction guideline to the PLL design considera‐

tions.

May 2015

2015.05.04 Rearranged the fine resolution phase shift equation.

December 2014

2014.12.15 • Corrected the statement that if you do not use the dedicated clock

input pins for clock input, you can also use them as general-

purpose input or output pins.

• Added description in Internal Oscillator Architecture and Features

to state that the internal ring oscillator operates up to 232 MHz and

this frequency is not accessible.

• Added connectivity restrictions guideline for internal oscillator.

• Added Internal Oscillator IP Core parameter: Clock Frequency.

• Moved Internal Oscillator Frequencies table from Internal

Oscillator Architecture and Features chapter to MAX 10 FPGA

Device Datasheet.

September 2014

2014.09.22 Initial release.

©

2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134

«
...
85
86
87

Содержание MAX 10
























































































Отзывы:

Нет отзывов

Похожие инструкции для MAX 10

Бренд: Panasonic Страницы: 12

Бренд: Galaxy Audio Страницы: 6

Бренд: ESI Страницы: 17

AZZUPRO 5-20-ZSS

Бренд: ZCS Страницы: 44

Бренд: Magnimage Страницы: 40

Бренд: SAJ Страницы: 26

Бренд: Lika Страницы: 2

BML-S1G0-B7 Series

Бренд: Balluff Страницы: 20

SignalPilot 51840

Бренд: Esu Страницы: 32

Бренд: National Semiconductor Страницы: 13

Бренд: Costway Страницы: 25

10/100/1000 (SFP)

Бренд: Dynamix Страницы: 2

Бренд: NANOTEC Страницы: 22

Бренд: Seneca Страницы: 4

Бренд: Analog Devices Страницы: 10

Бренд: Weco Страницы: 56

Бренд: HEIDENHAIN Страницы: 36

Бренд: Channel Vision Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды