manualshive.com logo in svg

Altera MAX 10, Руководство пользователя

Поделиться
Скачать
Altera MAX 10 Скачать руководство пользователя страница 34

The counter settings are updated synchronously to the clock frequency of the individual counters.

Therefore, not all counters update simultaneously.
The dynamic reconfiguration scheme uses configuration files, such as the Hexadecimal-format file (.hex)

or the Memory Initialization file (.mif). These files are used together with the ALTPLL_RECONFIG IP

core to perform the dynamic reconfiguration.

Related Information

•

Guideline: .mif Streaming in PLL Reconfiguration

 on page 3-5

•

PLL Dynamic Reconfiguration Implementation

 on page 4-10

•

PLL Dynamic Reconfiguration Parameter Settings

 on page 6-4

Provides more information about the ALTPLL IP core parameter settings in the Quartus II software.

•

ALTPLL_RECONFIG Parameters

 on page 7-1

Provides more information about the ALTPLL_RECONFIG IP core parameter settings in the Quartus

II software.

2-28

PLL Reconfiguration

UG-M10CLKPLL

2015.06.12

Altera Corporation

MAX 10 Clocking and PLL Architecture and Features

Send Feedback

Содержание MAX 10
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды