4
TEST
SET
MAX
16
17
13 14 15
19
18
20
Erected Jib – Enables the selection of the jib to be used on the boom. Selects extended or
13.
retracted jib when crane is equipped with two stage jib.
Basket Operation – Enables the selection of the platform for man basket operation.
14.
Outrigger Configuration – Enables the selection between full and mid span outriggers.
15.
Stowed Jib – Enables the selection of the jib stowed on the boom. Also used to stow the
16.
erected jib.
Winch Selection – Enables the selection of the winch if the crane is equipped with an optional
17.
second winch (for models euipped with auxiliary winch only).
Alarm Cancel – Disables audible alarm. Holding down this key overrides function kick-out.
18.
Test Button – Press and hold the test button to initiate a system self test and run diagnostics.
19.
Operator Alarm/Set – Enables operator alarms. When an alarm has been set, the LED above
20.
this button will illuminate yellow.
m
WArnIng
YOu MuST uSE ThE CrAnE SETuP MODE TO COrrECTLY SET ThE LMAP SYSTEM FOr
PrOPEr OPErATIOn. ThE LMAP SYSTEM SETuP MuST MATCh ThE ACTuAL COnFIgurATIOn
OF ThE CrAnE SO ThAT IT WILL InDICATE ThE COrrECT hOOK LOAD AnD LIFTIng CAPACITY
OF ThE CrAnE.
