Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Figure 4-5 Radio0 Channel Usage information
Tx% (Avg)
: Average transmit frames percentage of operating channel.
Rx%(Avg)
: Average receive frames percentage of operating channel.
Busy%(Avg)
: Average busy state percentage of operating channel.
Noise Floor(dBm)
: Noise floor of operating channel.
CTL0
: Chain 0 Noise Floor of the Control Channel (i.e. the center channel for HT20
case).
CTL1
: Chain 1 Noise Floor of the Control Channel (i.e. the center channel for HT20
case).
EXT0
: Chain 0 Noise Floor of the Extension Channel (i.e. the 2
nd
channel of the HT40
case).
EXT1
: Chain 1 Noise Floor of the Extension Channel (i.e. the 2
nd
channel of the HT40
case).
Interference Mitigation Offset
(
0-50dB)
: This option will mask all noise / valid signal
below "0-50" dB.
Traffic Distribution
: Shows the distribution of control frame, data frame, management
frame, etc. This information can be used to analyses device’s performance. Click
‘
reset statistics
’
can rest the #TX, TxBytes, TxBytes%, #Rx, RxBytes and RxBytes% data.
Click ‘
Refresh
’ button can refresh the #TX, TxBytes, TxBytes%, #Rx, RxBytes, RxBytes%
data. Click ‘
close
’
button at the bottom can close the ‘Traffic Distribution Statistics’
webpage.