Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
2)
Thin AP
Show the status of thin AP function (On/Off).
When the thin AP function is On, We’ll see more information about AC:
AC IP Address
: shows the AC IP address.
AC Association Status
: shows the status of thin AP associate to AC.
AC IP Address(DHCP Option 43)
: shows the AC IP acquired from DHCP Option 43.
AC IP Address(DHCP Option 60)
: shows the AC IP acquired from DHCP Option 60.
AC Online Time
: shows the AC online time.
3)
Network (Switch/Gateway)
It shows the status and information of network. It is switch mode as default.
IPv4
DHCP
Client
: Whether C1n Series AP/CPE was configured as IPv4 DHCP client.
IPv4
Address
: current IPv4 address
IPv4
Subnet
Mask
: IPv4 subnet mask
IPv4
Default
Gateway
Address
: IPv4 gateway address
IPv4
DNS Server
: IPv4 DNS Server
4)
Interfaces (2)
-
Ethernet
It shows the status and information of Ethernet including Mac address, Traffic (Tx/Rx),
Speed, Throughput (Tx/Rx), Duplex and Auto-negotiation. If click the “
More>>
”, more
detail information will be shown.
-
Radio0 (2.4G) (for C1n & C1xn)
It shows Radio0 interface information including Operation Mode, Mac address, Traffic
(Tx/Rx), Wireless Mode, Throughput (Tx/Rx), Channel, Channel Usage(Busy%),Transmit
Power and Noise Level. If click the “
More>>
”, more detail information will be shown.
As default, the 2.4G radio is on.
-
Radio0 (5G) (for C1an & C1xan)
It shows Radio0 interface information including Operation Mode, Mac address, Traffic
(Tx/Rx), Wireless Mode, Throughput (Tx/Rx), Channel, Channel Usage(Busy%),Transmit
Power and Noise Level. If click the “
More>>
”, more detail information will be shown.
As default, the 5G radio is off.
4.2.
Interface
User may check the interface information of Radio0 and Ethernet via
Status
Interface
.
