Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
them out. If user specifies a WLAN as VLAN pass through, C1n does not modify the
incoming packets that are tagged. Also, C1n tags the packets, which are not tagged,
with native VLAN ID if Native VLAN Tagging is enabled.
Auth Mode
: Specify security of particular WLAN; wireless client may be authenticated
during association.
Access Traffic Right
: Specify AP management privilege of associated client; there are
3 options: “Full Access”, “AP Management Only”, and “AP Management Disable”.
“Full Access”: Associated client can act as normal user and access AP for
configuration.
“AP Management Only”: Associated client can access AP for configuration only.
“AP Management Disable”: Associated client can act as normal user but cannot
access AP.
WLAN Uplink/Downlink Control
: Bandwidth control for WLAN; user may limit the
maximum speed of uplink and downlink for particular WLAN respectively. The value is
in term of kbps. “0” means disable. By default, it is disabled.
Station Uplink/Downlink Control
: Bandwidth control for each associated client in
particular WLAN; user may limit the maximum speed of uplink and downlink for each
associated client in particular WLAN respectively. The value is in term of kbps. “0”
means disable. By default, it is disabled.
5.4.1.1.2.1.
WLAN X (0-15) General Configuration
C1n Series AP/CPE radio0 supports maximum 16 WLANs, and they can be configured
separately. User may have detail configuration of each WLAN via
Configuration
Wireless
Radio0
WLAN
, then click “
More…
” of each WLAN.
Figure 5-25 WLAN General Setting
Enable WLAN
: Enable or disable this WLAN.
