Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Figure 5-23 Radio Parameters
Enable Radio
: Enable or disable radio0, by default it is enabled.
Radio Mode
: Operation mode of radio0, It can be configured as AP, Station,
Repeater or Bridge.
Country Code
: Specify country that C1n locates. This setting is related about radio
regulatory domain, such as maximum transmission power, available operating
frequency channel … etc. Hong Kong is default setting.
Wireless Mode
: Specify wireless mode of C1n; User may configure the WLAN standard
and channel bandwidth via this option.
Radio Frequency
: Specify the operating frequency channel. User may select “auto”
or fix a frequency channel manually. If “auto” is selected, C1n selects the best
channel automatically.
Transmit Power
: Specify the transmission power (dBm) of radio0.
Maximum Clients
: Specify the maximum number of users C1n serves. The value
should less than 256.
Enable Inter-WLAN User Isolation
: Allow or block inter-WLAN user communication. If
enabled, clients cannot communicate to each other directly when they associated
into different WLAN. By default, it is “disable”.
Disable HT20/HT40 Auto Switch
: C1n may change the channel bandwidth between
20 MHz and 40 MHz automatically during operating time. This option disables such
change if user enables this function. This option is available if
Wireless Mode
is
configured as HT40.
Periodic Auto channel Selection
: Specify how often C1n selects the operating
channel for WLAN. If enabled, user may specify channel selection time by either
schedule or periodic. This option is available if
Radio Frequency
is configured as “auto”
Dynamic Radio Frequency Selection (DFS)
: This configuration item can only have in
C1an and C1xan. DFS is a mechanism to allow unlicensed devices to use the 5 GHz
frequency bands already allocated to radar systems without causing interference to
those radars. When enabled, AP monitors radar during CAC period. Provided that no
radar is detected during CAC period, a communication link is established on the
selected channel. CAC period is 10 minutes between 5.6GHz and 5.65GHz; while
CAC period is 60 seconds outside 5.6GHz and 5.65GHz.
Remark: The Radio Frequency must be se
t to “Auto”.
