36
-EN
6
Adjust the level (LEVEL) by tur
ning and then
pressing the
Rotary encoder
.
The level can be adjusted within the range of –5 to +5.
The higher the level, the more the position of the centre
speaker is shifted to the sides.
7
When the setting is complete, pr
ess and hold
CENTER f.
for at least 2 seconds.
The unit returns to the normal mode.
Press
CENTER f.
to select another item to be set.
• This adjustment is effective when the setting of the centre speaker
to SMALL or LARGE in the speaker setup settings.
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 30).
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 37.
Achieving powerful high volume sound
With Dolby Digital, the dynamic range is compressed so that
powerful sound can be achieved at regular volume levels. This
compression can be cancelled to achieve an energetic sound with even
greater power, like the sound in a movie theatre.
This function works only in the Dolby Digital mode.
1
Check that Defeat mode is of
f (page 19).
2
Press and hold
CENTER f.
for at least 2 seconds.
The audio processor control mode is activated.
3
Select the 5.1CH SETUP mode by pr
essing
CENTER f.
repeatedly .
4
Select LISTEN MODE by pr
essing
g
or
f
.
5
Select ST ANDARD or MAXIMUM by tur
ning and
then pr essing the
Rotary encoder
.
STANDARD
: For powerful sound at regular volume levels
MAXIMUM
: For powerful sound at high volumes
6
When the setting is complete, pr
ess and hold
CENTER f.
for at least 2 seconds.
The unit returns to the normal mode.
Press
CENTER f.
to select another item to be set.
• Keep the volume to a level at which sounds outside the vehicle can
still be heard.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 37.
Adjusting the DVD Level
The volume (signal level) for Dolby Digital, Dolby PL II, DTS and
PCM modes can be set.
• Avoid stopping, pausing, switching the disc, cueing, fast-
forwarding or switching the audio channel of this unit while
making this adjustment. The setting is cancelled if the Decode
mode is switched.
1
Check that Defeat mode is of
f (page 19).
2
Press and hold
CENTER f.
for at least 2 seconds.
The audio processor control mode is activated.
3
Select the DVD LEVEL mode by pr
essing
CENTER f.
repeatedly .
4
Press the
Rotary encoder
to select the mode to
be adjusted.
DOLBY D
→
PL II
→
DTS
→
PCM
→
DOLBY D
5
Adjust the level (LEVEL) by tur
ning and then
pressing the
Rotary encoder
.
The level can be adjusted in the range of –5 to +5.
6
When the setting is complete, pr
ess and hold
CENTER f.
for at least 2 seconds.
The unit returns to the normal mode.
Press
CENTER f.
to select another item to be set.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 37.
Using the Pro Logic II Mode
Pro Logic processing can be conducted on the music signals recorded
on two channels to achieve Dolby Pro Logic II surround sound. For
two-channel Dolby Digital and DTS signals, there is also a “REAR
FILL” function for outputting the signals of the front channel to the
rear channel.
1
Check that Defeat mode is of
f (page 19).
2
Press and hold
CENTER f.
for at least 2 seconds.
The audio processor control mode is activated.
3
Select the DOLBY PL II mode by pr
essing
CENTER f.
repeatedly .
4
Select the desir
ed mode by pr essing
g
or
f
.
MOVIE MODE:
Suits the stereo TV shows and all programs
encoded in Dolby Surround. It improves the sound
field directivity to near that of discrete 5.1-channel
sound.
MUSIC MODE:
Can be used for all stereo music recordings, and
provides a wide, deep sound field.
REAR FILL ON:
Depending on the input signals, the sound may only
be output from the front speakers. In this case, the
“REAR FILL” function can be used to output signals
from the rear speakers as well.
OFF:
Turns DOLBY PL II function to OFF.
Содержание DVA-9860R
Страница 64: ......
