9
-EN
RDS
Setting RDS Reception Mode and Receiving
RDS Stations
The RDS (Radio Data System) is a radio information system using
the 57 kHz subcarrier of regular FM broadcast. The RDS allows you
to receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1
Press
F/SETUP
so that the “F” indicator lights up.
2
Press
1/AF
to activate the RDS mode.
3
Press
g
or
f
to tune in the desired RDS
station.
4
Press
1/AF
again to deactivate the RDS mode.
5
Press
F/SETUP
to activate the normal mode.
The “F” indicator goes out.
The RDS digital data includes the following:
PI
Programme Identification
PS
Programme Service Name
AF
List of Alternative Frequencies
TP
Traffic Programme
TA
Traffic Announcement
PTY
Programme Type
EON
Enhanced Other Networks
Recalling Preset RDS Stations
1
Press
F/SETUP
so that the “F” indicator lights up.
2
Press
1/AF
to activate the RDS mode.
3
Press
F/SETUP
to activate the normal mode.
The “F” indicator goes out.
4
Make sure that the “F” indicator light goes out, then
press the preset button in which your desired RDS
station is preset.
If the preset station's signal is weak, the unit automatically
searches and tunes to a stronger station in the AF
(Alternative Frequencies) list.
TA
g
f
3/PTY
BAND
F/SETUP
1/AF
TITLE
2/NEWS
5
If the preset station and the stations in the AF list
cannot be received:
When the PI SEEK setting is on (refer to “PI SEEK Setting”
on this page), the unit searches again for a station in the
PI (Programme Identification) list.
If there are still no stations receivable in the area, the unit
displays the frequency of the preset station and the preset
no. disappears.
If the signal level of the Regional (Local) station being
tuned becomes too weak to receive, press the same
preset button to tune in a Regional station in other district.
• For presetting the RDS stations, refer to the Radio Operation
section. The RDS stations can be preset in the F1, F2 and F3 bands
only.
Receiving RDS Regional (Local) Stations
1
Press and hold
F/SETUP
for at least 2 seconds to
activate the setting mode.
2
Press
g
or
f
to select the RDSREG mode.
3
Press
BAND
to turn on or off the RDSREG mode.
In the RDSREG OFF mode, the unit automatically keeps
receiving the related local RDSREG station.
4
Press
F/SETUP
to deactivate the setting mode.
PI SEEK Setting
1
Press and hold
F/SETUP
for at least 2 seconds.
2
Press
g
or
f
to select the PI SEEK.
3
Press
BAND
to turn on or off the PI SEEK mode.
4
Press
F/SETUP
to deactivate the setting mode.
Receiving Traffic Information
1
Press
TA
so that the “TA” indicator lights up.
2
Press
g
or
f
to select your desired traffic
information station.
When a traffic information station is tuned in, the “TP”
indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast, the
unit is set in the standby mode. When a traffic information
broadcast begins, the unit automatically receives it and
the display shows “TRF-INFO” for a few seconds and
returns to the PS display.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
Continued
Содержание DVA-9860R
Страница 64: ......
