User manual UNii
Rev.2.11 – 14-07-2022
6
EN
Display
In the picture below the OLED display of the UNii keypad is shown.
1.
System name (2 lines)
2.
Function of the function keys
3.
Local Time
4.
Indication that there is a message in the system.
5.
Indication that the installer is authorised to enter the programming.
6.
System is in test mode (contact your installer)
Card reader
The keypad of the UNii security system is available in 2 versions: a standard version and a luxury version with a
built-in card reader. The card reader is located directly under the numeric key 5. The card reader uses the latest
DESFire EV2 reading technology, the most secure reading technology at this moment. The reading distance of the
card reader is approximately 5 cm above the numeric key.
Sections and Groups
The UNii security system uses Sections and Groups.
A section is a part of the security system and can be armed and disarmed independently from the rest of the
system. An example of a section is for example, the ground floor of a residential house, a wing of an office
building or the warehouse of a company. Each section has a name that is programmed by the installer during
installation.
Groups can also be created above the section structure. A group can be created to arm or disarm multiple
sections simultaneously. An example of a group is complete floor of a building of the entire house, a group also
has a name that is programmed by the installer during installation.
Groups and sections can be armed and disarmed by a user by means of a PIN code or DESFire tag.
