User manual UNii
Rev.2.11 – 14-07-2022
5
EN
Keypad
Below is a picture of the UNii keypad.
Keys
The numerical keys 0 to 9 are used to enter a PIN code or numerical values in the menus.
The keypad has 4 black function keys, these keys are located above the numeric keys and have no fixed function.
Depending on the status of the system, the operation being performed or the menu in which the user is located,
the function of the function key may change. The function of the key is indicated by a text directly above the key in
the display. The 3 left function keys can also be used as a shortcut. A hotkey can perform a specific action, such
as switching on a certain section immediately in the night situation or activating an output. Ask your installer
about the options.
The keypad has Navigation keys, the numeric keys 2, 4, 6 and 8 are next to numeric keys also a navigation key.
When navigation is possible or desired, the key illumination will go out under all other keys. With the navigation
keys, only the keys of the navigation directions that are currently possible will light up.
Proximity sensor
The keypad is equipped with a proximity sensor. The proximity sensor causes the key backlight illumination and
OLED display to light up as soon as movement is detected in the nearby vicinity of the keypad. The sensitivity of
the proximity sensor can be set by the supervisor in the user menu. See keyboard settings later on in this manual.
1.
OLED display
2.
Keys
3.
Function keys
4.
Proximity sensor
5.
Card reader (optional)
6.
Navigation keys
