User manual UNii
Rev.2.11 – 14-07-2022
8
EN
Menu
This function key opens the user menu where several functions and menus can be found. See the “User
menu” chapter for more explanation about individual functions and menus.
Arming with a tag
If the keypad is equipped with a built-in card reader, it is possible to arm and disarm the system using a DESFire
EV2 tag or card. Depending on the tag settings (direct arm/disarm or normal), the tag will work as if a normal
(PIN) code has been entered and the user must first select the relevant sections or groups and press the "arm"
function key to arm. If direct is programmed the system will be armed immediately if all sections or groups linked
to the tag are disarmed. If one or more sections or groups are already armed, the system will disarm, arming will
be done by presenting the tag again.
Information
If information is present, the system will indicate this by showing the "i" symbol on the right-hand side of the
display and an audible beep via the buzzer of the keypad. With function key 3 (info) the information can be
displayed and possibly deleted. When all messages have been deleted, the "i" symbol will disappear from the
display.
Time switches
The system can be programmed to arm and disarm automatically, for an explanation see chapter "Time switch" in
the User menu.
Test mode
When the installer has placed the system in the test mode, the ‘!’ Symbol is shown in the display. For more
information consult your installer.
Installer authorised
If the installer is authorized by the supervisor (main user code) to access the system, a tool symbol is shown on
the right of the display. The supervisor has the choice to give the installer only installer rights or to give ins
user rights. A time limit can also be entered for how long the installer has authorization for the system.
If the installer is not authorized by the supervisor, he cannot do anything in the system.
Audible signals of the system
Alarm:
Alarm siren sound will be heard via the connected siren or speaker.
Fire:
Slow-whoop fire sound will be heard via the connected siren or speaker.
Key stroke:
Short tone 0,5 seconds.
Trouble buzzer:
●□●□●
short tone every 10 seconds
(can de set to no sound during the night).
Entry buzzer:
Constant tone (during programmed time).
Exit buzzer:
□
□
□
●
□
●
□
●
□
intermitted tone (last 5 seconds faster).
Tones
●
= 0,5 sec. tone
= 1 sec. tone
□
= pause
