manualshive.com logo in svg

alphatronics 003611, Руководство по установке

Поделиться
Скачать
alphatronics 003611 Скачать руководство пользователя страница 25

Service manual AlphaCom PSTN2IP ML transceiver              Rev. 1.6 10-09-2011            Page 25/65 

 

For the AlphaCom PSTN2IP ML a total of 4 transceiver channels can be programmed. This is subdivided in 
2 transceivers both with their own backup transceiver. 
 
By selecting IP transceiver 1, the settings will be displayed for transceiver 1 including the backup 
transceiver. When choosing for IP transceiver 2, the settings will be displayed for transceiver 2 including the 
backup transceiver.  
 
Transceiver 1 is always enabled. The other 3 transceiver channels can be enabled or disabled by selecting 
„enabled‟ or „disabled‟ option. 
 
The account number is a 4 digit number that is provided by the central station. Also the IP address and the 
port number have to be supplied to you by the central station. 
 
The 

Local Port

 is freely programmable. This setting are only important for the settings in the firewall in case 

the programming has to be accessible from a remote site. UPD packages sent from the central station must 
be forwarded by your firewall to the AlphaCom PSTN2IP ML when using remote access. Please be aware 
that the 4 transceivers must use a different local port number!. The default settings are 8000, 8001 (back-up 
transceiver 1), 8002 (transceiver 2) and 8003 (back-up transceiver 2). 
 
The central station 

Protocol

 is determined by the central station. 

 
The 

Supervision Interval

 is also called „polling interval‟. It defines how often control packages are sent from 

the PSTN2IP to the central station. The supervision interval must be set according to the risk-class 
determined for the specific installation. The central station has control over the minimum and maximum 
polling values that can be entered. If a polling interval is programmed which does not comply with the 
settings in the central station receiver equipment, the programmed value in the PSTN2IP ML will 
automatically be changed to fit the central station receiver settings. Refer to the section „Settings according 
to local requirements‟ 
 
The 

Periodic Test Message

 interval and code is used by the PSTN2IP to generate it‟s own test message. If a 

Code (for example RP) is not programmed a test message will not be sent. 

 

 
The configuration screen for transceiver 2 is identical to the settings used for transceiver 1. 
 
 

Содержание 003611


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды