background image

2

We reserve the right to modify technical specifications without prior notice.
UK830637/210804 – Translation of the operating manual  © Alpha-InnoTec GmbH

please read first

This operating manual provides important information 
on the handling of the unit. It is an integral part of the 
product and must be stored so that it is accessible in the 
immediate vicinity of the unit. It must remain available 
throughout the entire service life of the unit. It must be 
handed over to subsequent owners or users of the unit.

Read the operating manual before working on or 
operating the unit. This applies in particular to the 
chapter on safety. Always follow all instructions 
completely and without restrictions.

It is possible that this operating manual may contain 
instructions that seem incomprehensible or unclear. In 
the event of any questions or if any details are unclear, 
contact the factory customer service department or the 
manufacturer’s local partner.

Since this operating manual was written for several 
different models of the unit, always comply with the 
parameters for the respective model.

This operating manual is intended only for persons 
assigned to work on or operate the unit. Treat all 
constituent parts confidentially. The information 
contained herein is protected by copyright. No part of 
this manual may be reproduced, transmitted, copied, 
stored in electronic data systems or translated into 
another language, either wholly or in part, without the 
express written permission of the manufacturer.

symbols

The following symbols are used in the operating manual. 
They have the following meaning:

 

Information for operators.

  Information or instructions for qualified 

technicians.

 Danger!

 

Indicates a direct impending danger 
resulting in severe injuries or death.

 WarnIng!

 

Indicates a potentially dangerous situation 
that could result in serious injuries or 
death.

 CautIon!

 

Indicates a potentially dangerous situation 
that could result in medium or slight 
injuries.

 CautIon!

 

Indicates a potentially dangerous situation, 
which could result in property damage.

 note.

 

emphasised information.

  energy savIng tIp

 

Indicates suggestions that help to save 
energy, raw materials and costs.

 Reference to other sections of the operating 

manual.

 Reference to other instructions of the 

manufacturer.

Содержание WZS Series

















































Отзывы: