9
We reserve the right to modify technical specifications without prior notice.
UK830637/210804 – Translation of the operating manual © Alpha-InnoTec GmbH
transport to installation loCation
To avoid damage during transport, you should transport
the unit to the final installation location (secured on a
wooden pallet) using a lifting truck.
If it is not possible to transport the unit to the final
installation location using a lifting truck, you can also
transport the unit using a hand truck.
WarnIng!
several people are required to transport
the unit. Do not underestimate the weight
of the units.
overview “Technical data / scope of delivery”,
“General unit data” section.
CautIon!
Wear safety gloves.
WarnIng!
unit is not fastened to the wooden pallet.
the unit can tip when being lifted down
and during transport with a hand truck.
this can result in personal injury and
damage to the unit.
– take suitable precautions to prevent
the risk of tipping over.
proceed as follows if transport with a lifting truck is not
possible:
Remove packaging and transport material. Remove
extra box and module box from the wooden pallet
and bring to installation location.
Use straps to lift and carry the module box.
CautIon!
Do not tilt the module box more than a
maximum of 45° (in any direction).
CautIon!
never use components, pipes of the
cooling circuit or hydraulic connections on
the module box for transport purposes.
CautIon!
Do not damage the hydraulic connections
under any circumstances.
dispose of angle bracket, transport and packaging
material properly and in accordance with ecological
principles.
We recommend removing the front panel to reduce
the weight of the unit for further transport.
loosen quick-release screws for the front panel.
Turn through 90° to the left…
lift front panel and set aside in a safe place.
Danger!
the carrying strap attached to the back of
the unit is an aid for tipping the unit onto a
hand truck! always secure the unit on the
hand truck with a tension belt!
the carrying strap can also be used
as a transport aid so that the unit
without the module box can be carried
by two persons (see illustration)!
Do not lift or transport the unit using only
the strap!
– the strap could break!
– persons could be injured!
– persons beneath the load could be
fatally injured!
– the unit itself or other equipment
could be damaged!
