017-230-B4 Rev B
56
6.4 The Alpha UPS Monitor Interface
CAUTION!
Close the Alpha UPS Monitor application and disconnect when not in use.
The Alpha UPS Monitor graphical user interface (GUI) provides web or Windows like computer communications
with the Alpha FXM. The screen and its features, shown in Figure 12, are used to monitor, control and set various
parameters like the date and time, determine when to perform a weekly self test, change the relay configurations,
etc. The on line indicator (F) shows if you are connected to the Alpha FXM.
The Alpha UPS Monitor automatically polls the Alpha FXM to obtain its status. If a light or lights are illuminated in
the Fault or Alarm fields, the Alpha FXM has a malfunction. Hover your mouse cursor over the light to learn the
type of malfunction or double-click on it to go straight to the
Alarms & Faults
screen.
To control the unit or change settings or parameters, either click on the On/Off buttons, or choose an item from a
drop down menu. Then click on the
Update Configuration
button. If you do not click on this button, the change
will not happen.
Figure 49 — Alpha UPS Monitor (UPS Specification Screen shown)
A
Screen selection menus
B
Current UPS operating mode. Updates automatically.
C
Fault and alarm indicators – when a light in this bar is illuminated, move the mouse
cursor over the light to determine the malfunction. Double-clicking on the light will
send you to the Alarms & Faults screen.
D
Readout screens
E
Drop-down menus
F
Online indicator
B
A
E
D
C
F
