background image

1

62909-000

March 2010

Purpose

This Quick Installation Guide (QIG) provides the minimum information needed to connect and startup your 1600 XP UPS.  The 

complete 1600XP Users Manual and supporting documentation are provided in the accompanying CD (P/N 62908).  The self-

starting CD requires a PC with a web browser (e.g Microsoft Explorer) and a PDF file viewer (e.g. Adobe Acrobat Reader).

If requested, a printed manual may be provided at no cost from Toshiba International Corporation.  Contact UPS Marketing at 

800-231-1412. 

NOTE: This QIG is not intended to replace the 1600XP Users Manual.  

Toshiba  International  Corporation  reserves  the  right,  without  prior  notice,  to  update  information,  make  product  changes,  or 

discontinue any product or service identified in this publication.

Toshiba International Corporation shall not be liable for direct, indirect, special, or consequential damages resulting from the use 

of the information contained within this QIG.

QUALIFIED PERSONNEL ONLY

Qualified person

 is one that has the skills and knowledge relating to the construction, installation, operation, and maintenance 

of the electrical equipment and has received safety training on the hazards  involved (Refer to the latest edition of NFPA 70E for 

additional safety requirements).

Qualified personnel shall:

Have read the entire operation manual.

1. 

Be trained and authorized to safely energize, de-energize, ground, lockout and tag circuits and equipment, and clear faults 

2. 

in accordance with established safety practices.
Be  trained  in  the  proper  care  and  use  of  protective  equipment  such  as  safety  shoes,  rubber  gloves,  hard  hats,  safety 

3. 

glasses, face shields, flash clothing, etc., in accordance with established safety practices.
Be trained in rendering first aid.

4. 

Be knowledgeable of batteries and the required handling and maintenance precautions.

5. 

For further information on workplace safety visit www.osha.gov.

Misuse of this equipment may result in human injury and equipment damage. In no event will Toshiba Corporation be responsible 

or liable for either indirect or consequential damage or injury that may result from the misuse of this equipment.

DO NOT open or mutilate the batteries. Released electrolyte is harmful to the eyes and skin and could also be toxic.

DO NOT dispose of the battery module in a fire. The batteries inside may explode.

To be performed by 

Qualified Personnel Only

:

Verify that the UPS is off and that the power is disconnected from the power source.

1. 

Remove watches, rings or other metal objects.

2. 

Use tools with insulated handles to prevent inadvertent shorts.

3. 

Wear rubber safety gloves and boots.

4. 

DO NOT place tools or any metal parts on top of batteries.

5. 

Contact with any part of a grounded battery can result in electrical shock.

The likelihood of shock will be reduced if such grounds are removed prior to installation or maintenance.

Quick Installation Guide

1600XP Series UPS

Содержание 1600XP SERIES

Страница 1: ...orized to safely energize de energize ground lockout and tag circuits and equipment and clear faults 2 in accordance with established safety practices Be trained in the proper care and use of protective equipment such as safety shoes rubber gloves hard hats safety 3 glasses face shields flash clothing etc in accordance with established safety practices Be trained in rendering first aid 4 Be knowle...

Страница 2: ...UPS will not influence some sensitive devices that are operating near by If such interference is experienced the UPS should be installed farther away from the affected equipment and or powered from a different source than that of the affected equipment After ensuring that all power sources are turned off and isolated in accordance with established lockout tagout procedures 10 connect the power sou...

Страница 3: ...ba DO NOT add any additional jumpers Note 3 8 22 kVA UPSs have a jumper bus bar Output Terminal Connections Connect the load to the output terminals according the load voltage requirements See the Output Terminal Voltages table to the right Wire Size and Tightening Torque Use the following table to select the recommended wire size and terminal lug tightening torque for I O wire connections Item Te...

Страница 4: ...r MCCB to OFF Leave the UPS off until the DC bus is safely discharged approximately 5 10 minutes Restart the UPS by switching the main circuit breaker ON The table below summarizes the initialization parameters ID Command Options 111 Rated Vin Select from 208V 230V or 240V and press Write 215 Rated Vout Select from 208V 230V or 240V and press Write 141 Input Frequency Select from 60Hz or 50Hz and ...

Отзывы: