Page 22 of 33
bottom item on the menu is an ‘EXIT’ function that returns the user to the ‘Logging
Menu’.
The ‘Edit TAG’ screen operates in exactly the same way as the ‘Create TAG’ screen.
(See 9.2.5).
11.2.7
Delete TAG
Description – This function allows the user to delete any of the 19 TAG references
produced using the ‘Create TAG’ function.
Operation – In the ‘Logging Menu’ select the ‘Delete TAG’ option. The user is then
presented with the ‘Delete TAG’ menu showing all current TAG references. Highlight
the required TAG reference and press the ‘ ’ key to move to the ‘Delete TAG’ screen.
The bottom item on the menu is an ‘EXIT’ function that returns the user to the ‘Logging
Menu’. The ‘Delete TAG’ screen allows the user to delete the TAG reference by
pressing the ‘ ’ key or return to the ‘Logging Menu’ without deleting the TAG
reference by pressing the ‘
’ key.
Note: When a TAG reference is deleted all the associated data blocks are also lost.
When a TAG reference is deleted, its slot is filled with the word EMPTY. TAG1 cannot
be removed, when deleted it is renamed back to the predefined reference of ‘Default
TAG’.
11.2.8
Printer LOG
SAFE AREA ONLY
Description – This function allows the user to real-time log the moisture value seen by
the SADPminiEx to any ASCII thermal printer via the RS485 ‘D’type connector
communications port. The SADPminiEx outputs ASCII strings unsolicited without the
need for handshaking at the interval selected.
Operation – In the ‘Logging Menu’ select the ‘Printer LOG’ option.
The user is required to enter a value for the interval between readings in minutes. The
default setting is 0.1 minutes or 6 seconds. Pressing the ‘ ’ key starts, the logging
process and brings up the ‘External LOG’ display screen, which indicates the current
moisture value.
Pressing the ‘
’ key at any point will stop logging.
Note: By default the SADPminiEx will output a moisture value in the current units every 6
seconds.
