Programming Guide
Navigation Keys (buttons)
Four navigation keys are located on the lower half of the MATE3s. They are protected by the front cover when it is
in place. The navigation keys allow the user to move around within the menu structure. They also provide access
to the
Main Menu
programming and the various components connected to the HUB.
o
The
TOP
navigation key (
A
) returns the operator to the top of the
Main Menu
for the selected device.
From the
Main Menu
, the
TOP
or
LOCK
keys return the operator to the Home screen.
o
The
UP
navigation key (
B
) returns to the menu item on the previous screen that was used to access the current screen.
It moves up, or back, one screen in the menu map for the selected device. See the
MATE3s Menu Map
.
o
The
LOCK
navigation key (
C
) locks the access to prevent unauthorized changes to the system settings. It also provides
access to the
Enter Password
screen. (See page 2.)
o
The
PORT
navigation key (
D
) cycles through each device connected to a port on the HUB Communications Manager.
See page 6 for OPTICS RE monitoring with this key.
About OutBack Power Technologies
OutBack Power Technologies is a leader in advanced energy conversion technology. OutBack products
include true sine wave inverter/chargers, maximum power point tracking charge controllers, and system
communication components, as well as circuit breakers, batteries, accessories, and assembled systems.
Contact Information
Mailing Address:
Corporate Headquarters
European Office
17825 – 59
th
Avenue NE
Hansastrasse 8
Suite B
D-91126
Arlington, WA 98223 USA
Schwabach, Germany
Web Site:
www.outbackpower.com
Disclaimer
UNLESS SPECIFICALLY AGREED TO IN WRITING, OUTBACK POWER TECHNOLOGIES:
(a) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY
TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION.
(b) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSS OR DAMAGE, WHETHER DIRECT,
INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH
INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK.
OutBack Power Technologies cannot be responsible for system failure, damages, or injury resulting from
improper installation of their products.
Notice of Copyright
MATE3s Programming Guide ©
2017 by OutBack Power Technologies. All Rights Reserved.
Trademarks
OutBack Power, the OutBack Power logo, FLEXpower ONE, and Grid/Hybrid are trademarks owned and used
by OutBack Power Technologies, Inc. The ALPHA logo and the phrase “member of the Alpha Group” are
trademarks owned and used by Alpha Technologies Inc. These trademarks may be registered in the United
States and other countries.
Date and Revision
March 2017, Revision A
Part Number
900-0125-12-01 Rev A
Features
A
:
TOP
Navigation Key
B
:
UP
Navigation Key
C
:
LOCK
Navigation Key
D
:
PORT
Navigation Key
E: Control Wheel
F: Center Button
NOTE
: This document assumes knowledge of features, functions, and operation
of other OutBack products. Consult appropriate literature as necessary.
A
B
C
D
E
F
Bullet styles:
Home Screen
Main Menu
B
or
Settings Menu
System Menu
B
A
B
B
A
Contents:
Accessing the Main Menu………………... 2
Recommended Programming Order……..
4
Settings Menus……………………………..
4
o
System Settings………………………. 6
o
Inverter Settings…………….………..10
o
Charge Controller Settings…………. 18
o
Battery Monitor Settings……………. 22
o
MATE3s Settings………………….. 24
AGS……………………………… 24
HBX……………………………… 34
Grid Use Time………………….. 36
Load Grid Transfer………….…. 37
AC Coupled Control….………... 38
FLEXtime Schedule….….…….. 39
Profile Wizard……………………………. 40
Device Data Logs……………………….. 45
Event Logs……………………………….. 47
Firmware Update………………………… 48
Troubleshooting………………………….. 49
Specifications…………………………….. 51
Contact Information
