Setting
Setting
Function
PCS
Set the AC power supply to the
grid
Set the AC power supply to DG
AC_Tied
Minv
MinLowVbat
AC_Grid
AC_Gener
-
ator
PCS battery voltage lower limit
MaxHighVbat
PCS battery voltage upper limit
MaxHighVbat
PCS battery voltage upper limit
EquaChgVbat
PCS battery equalization voltage
Select inverter model, optional
T30/T50/T100/T150/TB250/TB500/TB100
EMS INSTRUCTION
EMS INSTRUCTION
12
13
3.2.5. Information
GridType
PCS AC wiring mode, three-phase four-wire
system
No used
Safety
Restart
System
System
NioCtrl
Dispatch
Date Time
Ethernet
Set the control mode to local
Set the control mode to remote
Scheduling protocol selection, Alpha/Nio
Set the dispatching communication method,
RS485 is used by default, CAN/LAN is to be
developed
No used
No used
No used
No used
No used
Customized use for customers Nio
Modbus baud rate selection, can be set to 19200
or 9600 (need to re-power after setting)
Server IP
Server Port
Client IP
English
Deutsch
Local
Remote
CtrlMode
Protocol
Scheduling device address
Scheduling timeout 0 means unlimited time for
EMS connection. If the timeout is not set as 0,
EMS will not be connected when the time is out
Dev_addr
EMS_timeout
ComMode
ModbusRTU
ModbusTCP
MSID
No used
Clear inverter power statistics
Clear the energy statistics of the meter
Set language to English
Set the subnet mask
Set the default gateway
Set the MAC address, here is a fixed MAC
address
Subnet Mask
Default
Gateway
MAC Address
New
password
Language
Reset
Energy
Reset
Meter
Restart EMS
Set time and date
Ethernet
Set the IP allocation method to automatic
Set IP address
IP Address
Set the IP allocation method to manual
IP method
Factory Reset
No used
Factory
Reset
Factory
Mode
Information
System serial number
SN
System Model
Model NO.
No used
Meter Model
TOP BMU software
version
TOP_BMU
BMU software version
BMU Ver
LMU software version
LMU Ver
ISO software version
ISO Ver
No used
BMSCommVer
H_Ver
EMS hardware version
EMS software version
S_ver
EMS Ver
