___________________________________________________________________
Alpha ESS Co., Ltd.
Page 50
Your Smart Energy
EMS Introduction and Set up
G
Down Button: Move cursor to downside or
decrease value.
H
ENT Button: Confirm the selection.
I
LCD Screen
Display the information of the inverter in
this LCD screen.
4.2
Introduction
This part is suitable for EMS firmware-version 1.01.67 and above.
4.2.1
Main
Main displays the inverter working status and
information, including:
•
Power: Current PV power
•
Total: Total power generation.
•
Battery: Current remaining battery
power (SOC).
•
Normal: Current working state of the
equipment, including Standby.
In the Main interface, press ENT key to enter the
menu’s main interface.
Use the up and down key to select a sub-menu,
press the ENT key to enter the selected sub-
menu, press Return key to return to the previous
layer.
4.2.2
Status
Status menu contains five sub-menus: Solar,
Battery, Grid, UPS and Comm .These display the
relevant information about the current physical or
communication interface respectively.
Grid interface displays the real-time information
on the utility grid side:
voltage U, current I, frequency F, P
Inv
, P
MeterAC
,
P
MeterDC
.
