Alpha Data ADM-PCIE-8V3, Руководство пользователя

Страница: 13 / 42

ADM-PCIE-8V3 User Manual
Signal Target FPGA Input I/O Standard pin
REFCLK100M IO_L24P_T3U_N10_EMCCLK_65 LVCMOS18 AJ28
Table 7 : EMCCLK
3.2.4 QSFP28
The QSFP28 cages are located in MGT tiles 129 and 128 and use a 161.1328125MHz default reference clock.
Note that this clock frequency can be changed to any arbitrary clock frequency up to 400MHz by re-programing
the Si5338 reprogrammable clock oscillator via system monitor. This can be done using the Alpha Data API or
over USB with the appropriate Alpha Data Software tools.
Signal Target FPGA Input I/O Standard "P" pin "N" pin
GTY_CLK_0B MGTREFCLK0_129 LVDS N33 N34
GTY_CLK_0C MGTREFCLK0_128 LVDS U33 U34
Table 8 : QSFP28 Reference Clocks
The QSFP28 cages are also located such that they can be clocked from a Si5328 jitter attenuator clock
multiplier. If jitter attenuation is required please see the reference documentation for the Si5328. https://
www.silabs.com/Support%20Documents/TechnicalDocs/Si5328.pdf
The Si5328 is configured with a 114.285MHz oscilator on XA and XB, SDA is at FPGA pin L29 (1.8V), SCL is at
FPGA pin L30 (1.8V) with external pull-ups included.
The Si5328 input clock comes from FPGA pins M29 and M30, and includes 100 Ohm AC coupled termination on
the 1.8V FPGA bank.
Signal Target FPGA Input I/O Standard "P" pin "N" pin
SI5328_REFCLK_OUT0 MGTREFCLK1_129 LVDS L33 L34
SI5328_REFCLK_OUT1 MGTREFCLK1_128 LVDS R33 R34
Table 9 : QSFP28 Jitter Attenuated Reference Clocks
3.2.5 FireFly
The two FireFly sites are located in MGT tile 125 and 126 and use a 161.1328125MHz default reference clock.
Note that this clock frequency can be changed to any arbitrary clock frequency up to 400MHz by re-programing
the Si5338 reprogrammable clock oscillator via system monitor. This can be done using the Alpha Data API or
over USB with the appropriate Alpha Data Software tools.
Signal Target FPGA Input I/O Standard "P" pin "N" pin
GTY_CLK_1B MGTREFCLK0_126 LVDS AE33 AE34
GTY_CLK_1C MGTREFCLK0_125 LVDS AJ33 AJ34
Table 10 : FireFly Reference Clocks
3.2.6 DDR4 SDRAM Reference Clocks
The two banks of DDR4 SDRAM memory each require a separate reference clock, as per Xilinx UltraScale MIG
design guidelines. The reference clocks for these interfaces are detailed below:
Both clocks are 300MHz by default.
Page 9 Functional Description
ad-ug-1308_v1_9.pdf