Alpego SKAT K1 5-250 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 24

Alpego SKAT K1 5-250 Скачать руководство пользователя страница 3

MANUALE SKAT K1 - K2

Old Cod.D08974

New Cod. MANT2010/00722 R.9

3

Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa

Consult this manual carefully before using

the machine. Knowing in detail the machine

is essential for safe usage.

Thank you for choosing Alpego, you have purchased a top quality product that is
guaranteed by a decade of experience.
Before leaving the factory, each machine is accurately inspected to guarantee that it is in
perfect condition.
Should you however, find any faults in the material, please contact your retailer
immediately.
Please do not hesitate to contact us should you need further information or assistance,
our aim is to constantly improve the product, keeping it at top level.

LOOK OUT FOR THE TRIANGLE. IT INDICATES DANGER

THE TERM MACHINE REPLACES THE COMMERCIAL DESCRIPTION OF THE ITEM
DESCRIBED IN THIS MANUAL

ALL DATA AND DESCRIPTIONS REPORTED IN THIS MANUAL ARE TO BE CONSIDERED
INFORMATIVE. THE PRODUCER IS NOT BOUND TO MAINTAIN THESE
CHARACTERISTICS WHICH COULD BE VARIED WITHOUT FOREWARNING.

«
1
2
3
4
5
...
»

Содержание SKAT K1 5-250

























Отзывы:

Нет отзывов