Alpego SKAT K1 5-250 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 24

Alpego SKAT K1 5-250 Скачать руководство пользователя страница 21

MANUALE SKAT K1 - K2

Old Cod.D08974

New Cod. MANT2010/00722 R.9

ACCESSORIES

- 17

Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa

7. ACCESSORIES

The machine can be equipped with various accessories. As the machine weight varies each time an accessory
is added to the tractor, make sure that tractor stability is not compromised.

7.1. SOD CONTAINING KIT

This device holds sods inside the working width of the machine, keeping them
from falling on the freshly-worked soil or the soil still to be worked.

It should be applied as shown in the figure.

7.2. WINGED SOIL SWEEP

This device is ideal for controlling soil explosion because it has
various regulation holes.
It should be applied directly to the shank replacing the protection.

7.3. REAR WHEEL SET

Use this device to set the working depth of the soil
for all tractors without a controlled lifting stress.
The wheel set should be applied to the machine
frame so as to be outside the shank furrow.

S13003 ( K2 )

S13001 ( K1 )

«
...
19
20
21
22
23
...
»

Содержание SKAT K1 5-250

























Отзывы:

Нет отзывов