Alpego SKAT K1 5-250 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 24

Alpego SKAT K1 5-250 Скачать руководство пользователя страница 13

MANUALE SKAT K1 - K2

Old Cod.D08974

New Cod. MANT2010/00722 R.9

INSTALLATION

- 9

Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa

4.3. CONNECTION TO TRACTOR K1

The machine is set for category 2 hitches. Above all check the weight on the axes and, if necessary, ballast the tractor at the
front.
After checking that the tractor can be connected to the machine, move it closer to couple the three points.
Switch off the motor, pull up the handbrake, then get off the tractor and prepare connection of the three points.

4.4. CONNECTION TO TRACTOR K2

The machine is set for category 3ª / 3ª USA / 4ª hitches.
Above all check the weight on the axes and, if necessary, ballast the tractor at the front.
After having made sure that the tractor can be connected to the machine, move it closer in order to couple the three points.
Switch off the motor, pull up the handbrake, then get off the tractor and prepare for connection of the three points

.

*

«
...
11
12
13
14
15
...
»

Содержание SKAT K1 5-250

























Отзывы:

Нет отзывов