21
DRAINING OPERATION.
Your product is with shower technology, that means that most of the moistures will be drained through
the exhaust pipe.
This is automatic.
Sometimes there are too many moistures and some parts go in an inner water tank.
When the water tank is full, E2 error appears on VFD screen, unit “bip” several times and stops working.
Turn off the unit, put the movable water tank (16) under the drainage knob (17) and unscrew the knob
and rubber plug to let water flow out.
When water tank is empty, replace knob and rubber plug and restart the unit.
CLEANING
Before any cleaning operation, stop and unplug the unit.
Do not use chemical solvent.
Use a dry and wet cloth to clean the outside of the unit.
Anti dust air filter:
If the anti dust air filter is dirty, the air conditioner will be less performing.
Clean the filter at least every two months.
Remove filter support (8) as shown on the drawing.
Remove bio-filter, take and wash the filter (vacuum cleaner or water and drying).
Put the bio-filter the filter and its support back.
Bio-filter:
This filter is a non-washable filter: if Bio-filter becomes dark, change it. At least, replace the filter once a
year.
DESCRIPTIF DE L’APPAREIL
4
1. Tableau de bord
2. Ailettes (sortie d’air)
3. Récepteur du signal de télécommande
4. Poignée
5. Entrée d’air
6. Roulette
7. Bouchon de vidange
8. Filtre à poussière
9. Cordon d’alimentation
10. Sortie d’air
11. Entrée d’air
12. Télécommande
13. Gaine d’évacuation
14. Adaptateur pour fenêtre
15. Liaison climatiseur/gaine
16. Bac pour récupérer l’eau
17. Manchon pour mur avec couvercle
18. Kit fenêtre
12
18
17
13
15
16
14
