8
Electricity Meter Panel - US version 2
S O L S H A R E
X X X X X X
M1
X X X X X X
M2
X X X X X X
M3
X X X X X X
M4
X X X X X X
M5
X X X X X X
M6
X X X X X X
M7
X X X X X X
M10
X X X X X X
M8
X X X X X X
M9
Installation overview
main switches
Electricity Meter Panel
solar circuit breakers
A single SolShare unit can distribute the power generated
from a single solar system to up to 10 multifamily units.
The SolShare takes a single split-phase input from a grid-
connected solar inverter(s) and connects to each participating
unit on a single line (L1 or L2) to the load side of their Unit
Main Switch (a.k.a. unit circuit breaker) at their meter panel.
A single-pole Unit Solar Circuit Breaker is required on each
output between the SolShare and each unit’s main switch.
This allows for the isolation of the SolShare and the solar
supply of any of the connected units.
A typical installation configuration is displayed below.
minimum
150mm
Explained
on p16
Explained
on p15
split phase
from inverter
Содержание SolShare 100
Страница 1: ...1 SolShare Installation Manual...