Allume SolShare 100, Руководство по установке

Страница: 13 / 23

13
IN (N) OUT (N)
IN (L1) IN (L2) 1(L1) 2(L2) 3(L1) 4(L2) 5(L1) 6(L2) 7(L1) 8(L2) 9(L1) 10(L2)
SOLAR INPUT OUTPUT 1-2 OUTPUT 3-4 5-6 7-8 9-10
NEUTRALS INPUTS OUTPUTS
ONLY CONNECT THE
EARTH CABLES OF
THE INPUT AND FIRST
OUTPUT
AC OUTPUT (NEUTRAL)
IS NOT BONDED TO
GROUND.
Terminal block - Neutral & Phase connections
Conductors from 12 AWG (4mm2) to 4 AWG (25mm2)
Stripping length 14mm
Tightening torque 18 lb-in (2Nm)
Earth Connection
Please refer to Appendix (p19) for Conductor Specification options.
1. Run input earth from inverter and connect to the SolShare’s earth bar (as shown above)
2. Run output earth cable from earth point in meter panel and connect to the SolShare’s earth bar (as shown above).
Warning:
Only one earth output should be wired from SolShare to meter panel.
Tightening Torque - IN-LBS (N.m)
Conductor size Attachment method / Bare wire / Termial / Lug / Ferrule
14 AWG - 10 AWG 35 [4.0]
8 AWG 40 [4.5]
6 AWG - 4 AWG 50 [5.6]