DIP (SW1) FUNCTIONS DEEPENING
- DIP 3
ON
:
“PRESSED BUTTON” FUNCTION ACTIVATED
OPENING ORDER
= OPENING WITH PRESSED BUTTON
CLOSING ORDER
= CLOSING WITH PRESSED BUTTON (with close pressed an order of “open”
blocks the closing movement)
THE PEDESTRIAN ORDER IS NOT CONNECTED
DYNAMIC ORDER = OPENING WITH SELF-HOLDING AND CLOSING WITH PRESSED BUTTON
At end opening, an impulse to the dynamic order closes with
pressed button
(closing activated, the order release
for 3 sec. (before arrive at FCC) stops the function = an other impulse connects the opening.
OPEN END-RUN
=
STOP THE OPENING
CLOSE END-RUN
=
STOP THE CLOSING
BLOCK
=
BLOCK THE MOVEMENT
With DIP8 on ON; “A” HIGH PHOTOCELL
= PHOTOCELL BLOCKS IN OPENING
With DIP7 on ON; “B” LOW PHOTOCELL
= PHOTOCELL BLOCKS IN CLOSING
With DIP6 on ON; DW24B (edges)
= DW24B BLOCKS IN CLOSING
With DIP8 on OFF; “A” HIGH PHOTOCELL
= PHOTOCELL NOT CONNECTED (OR DISACTIVATED)
With DIP7 on OFF; “B” LOW PHOTOCELL
= PHOTOCELL NOT CONNECTED
With DIP6 on OFF; DW24B (edges)
= DW24B NOT CONNECTED
- DIP3
OFF
:
PRESSED BUTTON DISACTIVATED
AUTOMATIC OR SEMIAUTOMATIC CYCLE
- DIP1
ON
: “
LOW” PHOTOCELL STOP TEMPORARILY THE MOUVEMENT
(stop the movement until the “low” photocell is obscurated, keep the counter of the
“Work Time”).
ON : “HIGH” PHOTOCELL BLOCK THE MOUVEMENT (CENTRALE BLOCKED)
ON REQUEST
TOUCH METER :
The electronic “counter” increase of 1 unit the count of manoeuvres made from the door every times that
the opening end-run is pressed.
Increase the count also when the open buttom is pressed and then the door is blocked with the mushroom
before being stopped from the end-run of open.
