background image

®

Owner's Manual

FOR RESIDENTIAL USE ONLY

®

CAUTION! PLEASE READ THIS MANUAL CAREFULLY

The MODEL NUMBER label is located on the front panel of your opener.

CONTENTS

PAGE

Safety Rules..............................................................2
Features of Your Opener .........................................3
Specifications ...........................................................3
You'll Need Tools .....................................................3
Completed Installation Illustration .........................4
Operation of Your Opener .......................................5
Accessories ..............................................................5
Care & Maintenance of Your Opener......................6
Assembly Instructions.............................................7
Installation Instructions.........................................10
Travel Limit Adjustments ......................................20

CONTENTS

PAGE

Force Adjustments ...................................................21

Safety Reverse Test..................................................22

Setting/Changing Code ............................................23

Having a Problem? ...................................................24

Carton Contents & Hardware Illustrated ................26

Repair Parts, Rail Assembly ....................................26

Repair Parts, Installation..........................................26

Repair Parts, Chassis Assembly.............................27

How To Order Repair Parts......................................28

Warranty ....................................................................28

FASTEN THIS MANUAL NEAR THE GARAGE DOOR AFTER INSTALLATION.

PERIODIC CHECKS OF THE OPENER ARE REQUIRED TO INSURE SATISFACTORY OPERATION.

Garage Door Opener

Model 139.18205SR - 1/2 HP
Model 139.18203SR - 1/3 HP

Содержание 139.18203SR - 1/3 HP





























Отзывы: