Chapter 1: AC-1000 Series Hardware
NetEnforcer AC-1000 Hardware Guide
1-27
The following procedure describes how to connect a Double Fiber Bypass Unit to
NetEnforcer AC-1020.
Figure
1-16 – Connecting the NetEnforcer AC-1020 to Double Fiber Bypass Unit –
Single Mode
To connect the Double Fiber Bypass to the NetEnforcer:
NOTE
For important information regarding cable and connector types, see
Cabling on page 1-14.
1.
Connect the fiber cable labeled To NetEnforcer External (Link 1) from the Bypass
Unit to the External port on the NetEnforcer (Link 1).
2.
Connect the fiber cable labeled To NetEnforcer Internal (Link 1) from the Bypass
Unit to the Internal port on the NetEnforcer (Link 1).
3.
Connect a 62.5/125
μ
or 9/125
μ
External fiber optic cable from the External (link 1)
port on the Bypass Unit to a 1 Gbps router.
To Internal
Switch
To External
Router
Содержание NetEnforcer AC-1000 Series
