Allot NetEnforcer AC-1000 Series, Руководство по оборудованию

Страница: 32 / 97

Chapter 1: AC-1000 Series Hardware
NetEnforcer AC-1000 Hardware Guide
1-22
NOTE Use 62.5/125
μ
or 9/125
μ
fiber optic cables with dual LC connectors (not
provided) to connect 1 Gbps ports of the switch and the router.
The Single Fiber Bypass Unit includes either two duplex LC connectors and one built in
fiber cable (for Multi Mode connections) or two quad LC connectors (for Single Mode
connections), along with two D-type 9-pin connectors for primary and redundant unit to
backup connection.
The following procedure describes how to connect a Single Fiber Bypass Unit to
NetEnforcer.
Figure 1-12 – Connecting NetEnforcer AC-1010 Fiber to Single Fiber Bypass Unit
– Multi Mode
To connect the Single Fiber Bypass to NetEnforcer:
NOTE For important information regarding cable and connector types, see
Cabling on page 1-14.
To Internal
Switch To External
Router