Chapter 1: AC-1000 Series Hardware
NetEnforcer AC-1000 Hardware Guide
1-7
Unit Status Indicators
The modes of operation of the Standby, Active and Power LEDs on the LCD panel are
described in the table below.
Indicator Status NetEnforcer
Status
Standby
On
Two NetEnforcers are connected in Parallel Redundancy
mode and this NetEnforcer is the secondary system.
Off
This NetEnforcer is the primary system. If you have one
NetEnforcer, this should be the normal state of the LED. If
you have two NetEnforcers configured in Parallel
Redundancy mode, this NetEnforcer is the primary system.
Active
On
NetEnforcer is in Active mode.
Off
NetEnforcer is in Bypass mode, or this is the secondary
NetEnforcer in a Parallel Redundancy configuration and it
is not active. Traffic passes through NetEnforcer with no
Quality of Service or traffic shaping.
Power
On
NetEnforcer is powered up.
Off
NetEnforcer is shut down.
Table
1-1 – Standby/Active/Power LED Conditions
Содержание NetEnforcer AC-1000 Series
