ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
94
6.6.13
Region Exiting Detection
Purpose:
Region exiting detection function detects people, vehicle or other objects
which exit from a pre-defined virtual region, and some certain actions can
be taken when the alarm is triggered.
Steps:
1.
Enter the Region Exiting Detection settings interface:
Configuration> Advanced Configuration> Smart Event> Region
Exiting Detection
2.
Check the checkbox of
Enable Region Exiting Detection
to enable
the function.
Figure 6-61
Configuring Region Exiting Detection
3.
Select the region from the dropdown list for detection settings.
4.
Click the
button to start the region drawing.
5.
Click on the live video to specify the four vertexes of the detection
region, and right click to complete drawing.
Repeat the step to configure other regions. Up to 4 regions can be set.
You can click the
button to clear all pre-defined regions.
6.
Click the
button to set the arming schedule. Refer to
Step 2
in
Section
6.6.1 Configuring Motion Detection
.
7.
Select the linkage methods for region exiting detection, including
Notify Surveillance Center, Send Email, Upload to FTP, Trigger Channel
and Trigger Alarm Output. Please refer to
Step 3
in
Section
6.6.1
Configuring Motion Detection
.
