ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
119
Figure 10-14
RS-485 Settings
2.
Set the RS-485 parameters and click
to save the settings.
The Baud Rate, PTZ Protocol and PTZ Address parameters of the
speed dome should be exactly the same as those of the control
device.
10.9
Configuring IR Light
This function is only applicable to the IR speed domes.
Steps:
1.
Enter IR Light Setting interface:
Configuration> Advanced Configuration> System > Service
2.
Check the checkbox to enable the IR light when the illumination is not
enough for the video monitoring.
Figure 10-15
Setting IR Light
3.
Click the
button to activate the settings.
10.10
Configuring Remote Connection
Steps:
1.
Enter the interface of configuring the remote connection:
Configuration> Advanced Configuration> System > Service
2.
Input a number in text field as the upper limit of the remote
