ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
42
Setting the duration to 0 means that there’s no duration when speed
dome tracks.
Not all the speed dome models support this function. Please take the
browser interface of the actual product as standard.
5.8
Configuring PTZ Control Priority
Steps:
1.
Get to the configuration interface:
Configuration >
Advanced Configuration> PTZ > Prioritize PTZ
.
The speed dome can be controlled by network and RS-485 signals.
You can set the control priority of these two signals.
The operation of
Operator
is prior to that of
User
. When the
Operator
is controlling the speed dome, the
User
cannot control it.
When the
Operator
finishes, the
User
can control the speed dome
after the
Delay
time. The
Delay
time can be set in Priority PTZ
interface as shown follows.
Figure 5-13
PTZ Priority
2.
Click
to activate the settings.
5.9
Clearing PTZ Configurations
Purpose:
You can clear PTZ configurations in this interface, including all presets,
patrols, patterns, privacy masks, PTZ limits and scheduled tasks.
Steps:
1.
Enter the Clearing Configuration interface:
Configuration > Advanced Configuration> PTZ > Clear Config
2.
Check the checkbox of the items you want to clear.
3.
Click
to clear the settings.
