ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
90
is high, a very small object can trigger the alarm.
6.
Click
to edit the arming schedule for tampering. The arming
schedule configuration is the same as the setting of the arming
schedule for motion detection. Refer to
Step 2
in
Section
6.6.1
Configuring Motion Detection
.
7.
Check the checkbox to select the linkage method taken for the
intrusion detection. Notify surveillance center, send email, trigger
channel, smart tracking and trigger alarm output are selectable. Please
refer to
Step 3
in
Section
6.6.1 Configuring Motion Detection
.
8.
Click
to save the settings.
6.6.10
Configuring Line Crossing Detection
The virtual plane detection can be adopted for the intrusion detection.
Once the virtual plane is detected being traversed according to the
configured direction, a set of alarm action is triggered.
Steps:
1.
Enter the Line Crossing Detection interface:
Configuration > Advanced Configuration > Events > Line
Crossing Detection
2.
Check the
Line Crossing Detection
checkbox.
3.
Select the Line in dropdown list to configure.
4.
The event triggered and park action related PTZ movement will be
locked for 180 seconds after you enter the line crossing detection
interface. Optionally, you can click the
button to manually
activate the movement, or lock the movement when the button turns
to
by clicking it.
