ALL-CAM2399-EP User Manual
© ALLNET GmbH Computersysteme 2015 – All rights reserved
Errors and omissions excepted
124
Appendix 2 Port Mapping
The following settings are for TP-LINK router (TL-R410). The settings vary depending on
different models of routers.
Steps:
1.
Select the
WAN
Connection Type
, as shown below:
Figure A.2.1 Select the WAN Connection Type
2.
Set the
LAN
parameters of the router as in the following figure, including IP address
and subnet mask settings.
Figure A.2.2 Set the LAN parameters
3.
Set the port mapping in the virtual severs of
Forwarding
. You need to forward
ports 80, 8000, 8200~8210 and 554 for a speed dome.
You can change 80, 8000 and 554 ports value in the speed dome with web browser or client
software.
In the speed dome, the 8200~8210 ports change with the 8000 port with a constant value of
200. E.g. if the 8000 port is changed to 8005, then the 8200~8210 ports should be changed to
