English - 17 / 36
6-1622396 - rev. 3 - 21/09/2021
7.1 LEARNING PROCEDURE
Ensure that throughout the learning process, boom handling takes place in complete safety and that there are no interventions of
safety devices that block the learning. In the latter case turn off the automation, manually bring the boom back to 45° respect the
ground and start a new learning procedure.
1.
Check that the boom is inclined to 45° relative to the ground, otherwise
refer to the procedure of FINISHING AND MECHANICAL ADJUSTMENTS
(Chapter 5.6).
2.
Press at the same time the “UP“ and “MENU” buttons for at least 5
seconds until the display shows
LOP
.
3.
If the automation DOESN’T MOVE in opening, press the “DOWN” button
to stop the learning. The display shows
L--
.
4.
Press the “SS” button to restart the procedure: the automation moves in
opening, at reduced speed, until it reaches the limit switch. In this phase
the display shows
LOP
.
5.
Reached the opening limit switch, the automation moves automatically
in closing, at running speed, until it reaches the closing limit switch. In
this phase the display shows
LCL
.
6.
Reached the closing limit switch, the automation moves automatically in
closing, at running speed, until it reaches the opening limit switch. In
this phase the display shows
LOP
.
7
Reached the opening limit switch, the automation moves in closing at
running speed and with the slowdowns set into the menu
LSI
.
UP
DOWN
MENU
SS
UP
DOWN
MENU
SS
UP
DOWN
MENU
SS
Содержание 12007336
