Allied Skid-Pac 1000 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 44

Allied Skid-Pac 1000 Скачать руководство пользователя страница 28

Allied Construction Products, LLC www.alliedcp.com

TM103349_SP1000B_15sep

18

10.0 Lifting, Transport & Storage

WARNING

Crush hazard. Injury may result if the
Skid-Pac shifts or falls. Do not lift the
Skid-Pac by the whip hose. The
recommended lifting points are identified
with the HOOK pictogram. Lifting
devices must safely carry the loads to
which they will be subjected. Lift away
from people. Do not enter the danger
zone while the attachment is being lifted.

CAUTION

Crush hazard. Keep hands and feet
clear of crush points. Always use
sufficient blocking to avoid accidental or
sudden movement of the attachment.

10.1 Lifting & Transport

See Technical Data Table for the weight of the work
tool.

10.1.1 When the attachment is transported
independently of the carrier

1.  Follow removal instructions in Section 7.

2.  Remove all loose debris from attachment.

3.  Secure hoses to unit to avoid accidental damage.

4.  Lift work tool only at approved lift points. The

recommended lifting points are identified with the
HOOK pictogram

5. Stabilize and secure the work tool for transport.

10.1.2 When the attachment is transported while
installed on the carrier

1.  Remove all loose debris from the work tool.

2.  Secure hoses to unit to avoid accidental damage.

3.  Transport carrier in accordance with carrier

manufacturer’s recommendations.

10.2 Storage

Observe the following storage precautions.



Store in upright position



Avoid wet or damp conditions to minimize rust



Seal hydraulic connections to protect against
contamination



Keep the motor full of oil to protect internal
components



Protect rubber components such as spring
mounts and hoses from exposure to direct
sunlight to reduce aging effects



Support the mounting frame with blocks to
minimize permanent sag in spring mounts.

«
...
26
27
28
29
30
...
»

Содержание Skid-Pac 1000













































Отзывы:

Нет отзывов