manualshive.com logo in svg

Allied Skid-Pac 1000, Безопасность, эксплуатация, техническое обслуживание и запасные части, Страница: 15 / 44

Поделиться
Скачать
Allied Skid-Pac 1000 Скачать руководство пользователя страница 15

Allied Construction Products, LLC www.alliedcp.com 

TM103349_SP1000B_15sep 

5

4.0 Product Information 

 

4.1 Description and Application - Typical 

 
The Allied Skid-Pac is a skid-steer-mounted, 
hydraulic powered, vibrating plate compactor. It is 
used for soil compaction. Applications include backfill 
compaction, base course preparation, finish surface 
treatment and embankment buildup.  
 
Specifically designed for skid-steers, installation of 
the Skid-Pac requires no additional mounting or 
hydraulic kits. It’s attached to the skid-steer in the 
same manner as mounting a bucket. Power to 
operate the Skid-Pac is provided by the skid-steer’s 
auxiliary hydraulic circuit.  
 
Suitable Skid-steers must have adequate lift and 
hydraulic capacities to properly and safely operate 
the Skid-Pac. Refer to the Specifications Table for 
operating specifications and carrier requirements.

 

Contact your dealer or Allied if you have any 
questions regarding the installation of this equipment. 
 

4.2 Familiarization of Main Components 
 

 

 

Fig. 4-1 Main Components Identified 

 
Dynamic Assembly

 – Consists of the lower 

assembly, eccentric mass, bearings and rubber 
springs. The strength of vibration is affected by the 
rotation speed of the motor, weight of the eccentric 
mass and the off-center distance between eccentric 
mass and shaft. The vibratory action and impulse 
force is transferred through the attached compaction 
plate. 

 
Suspension System 

– Rubber Springs mounted 

between the Top Frame and Dynamic Assembly 
isolate the vibratory energy from the carrier. 
 

Top Frame

 – The Top Frame serves as the 

connection point used to attach the Skid-Pac to the 
coupler of the skid steer. 

Control Valve

 – The Skid-Pac is standard equipped 

with the multi-function control valve. Benefits include 
optimized operation with improved reliability of critical 
components such as the motor and bearings. 

 
NOTE

: 

The valve is factory pre-set and requires no 

further adjustments.

  

 
The control valve performs the following functions: 
 

 

Flow regulator 

– Protects the bearings from 

excessive loads by limiting oil flow that can over-
speed the hydraulic motor.  

 

 

Pressure control 

– Protects the hydraulic 

components from over-pressure. This is factory 
pre-set at the maximum operating pressure plus 
200 psi (14 bar). 

 

 

Anti-cavitation circuit

 - Controls deceleration of 

the hydraulic motor and eccentric mass.  Also 
provides protection against motor damage if 
circuits not equipped with an open return. 

 

 

Return line check valve 

- Prevents reverse flow 

to the hydraulic motor. Also provides a nominal 
back-pressure to ensure the proper operation of 
auxiliary valves, such as Allied’s AC40 and AC75 
priority flow control valves. 

 

4.3 Principle of Operation 

 
The vibratory action and impulse force are generated 
by the hydraulic motor turning the eccentric mass at a 
high rate of speed. Efficient compaction of granular 
type soils is further aided by the static pressure 
exerted by the weight of the carrier pressing against 
the rubber springs. 
 

Содержание Skid-Pac 1000













































Отзывы:

Нет отзывов