Allied Construction Products, LLC www.alliedcp.com
vi
TM574173_HP4000_18feb
SAFETY Information – [cont’d]
Qualified Person
For the purposes of this manual, a qualified person is
an individual that has successfully demonstrated or
completed the following:
x
Has read, fully understands and adheres to all
safety statements in this manual.
x
Is competent to recognize predictable hazardous
conditions and possess the authorization, skills
and knowledge necessary to take prompt
corrective measures to safeguard against
personal injury and/or property damage.
x
Has completed adequate training in safe and
proper installation, maintenance and operation of
this Allied equipment.
x
Is authorized to operate, service and transport the
Allied equipment identified in Table 1.1.
Safety Information Overview
This manual contains important instructions that
should be followed during installation, operation and
maintenance. When working with the Allied
equipment all procedures and operations must be
performed correctly so that unsafe situations may be
avoided. Do not proceed beyond instructions or
warnings that you do not fully understand. Read the
entire manual to make sure you have a complete
understanding of the requirements. Safety
information becomes operation-specific in the
sections that follow.
Allied has made every effort to provide information as
complete and accurate as possible for this document.
Allied cannot anticipate every possible circumstance
that might involve a potential hazard. The warnings in
this manual and labels affixed to the Allied
attachment are therefore not all inclusive.
General Construction Safety
Always follow procedures that promote safe
conditions for workers and bystanders. The standard
safety precautions expected and required of those
working in construction shall include, but not limited
to:
x
Locating existing underground service and utility
lines
x
Erecting barriers to control entry to established
work zone
x
The use of appropriate personnel protection
equipment.
Federal, State, Local and OSHA Construction
Guidelines and Regulations
Use the Allied equipment in accordance with all
federal, state and local regulations regarding
construction practices and public safety. Identification
of, and compliance to, governing regulations are the
responsibility of the owner and operator.
In the United States, comply with the
recommendations of the Occupational Safety and
Health Administration standards of the U.S.
Department of Labor. For OSHA construction
guidelines contact your local federal government
office or write:
U.S. Government Printing Office Superintendent of
Documents P.O. Box 371954 Pittsburgh, Pa. 15250-
7954
Website: www.osha.gov
Ask for Construction Industry OSHA Standards Stock
#869-034-00107-6.
Owner’s Responsibilities
Ensure that only qualified personnel operate and
service the Allied equipment.
Ensure appropriate personnel protection equipment
is available to personnel when working in hazardous
conditions and enforce its use
Ensure equipment is kept in safe operating condition
Ensure safety-related materials such as instructions
and including this manual are kept in a convenient
location so that they are easily accessible to
operators and maintenance personnel.
Attention Read the Manual
Read and follow all safety precautions in this
manual. Improper installation, operation or
maintenance of the Allied equipment could result in
serious or fatal injury. Only qualified personnel may
operate and service the Allied equipment. Other
manuals, such as those published by the machinery
used in support of the Allied equipment, should also
be read.
Содержание HO-PAC 4000
Страница 43: ...Allied Construction Products LLC www alliedcp com 33 TM574173_HP4000_18feb NOTES ...
Страница 44: ...R ...
